Ich möchte euch nun hier die ersten Teile und Daten meiner geplanten DIY LED vorstellen.
Die Lampe wird eine Größe von 170 cm x 60 cm haben und ist für ein SPS Becken ausgelegt.
Profil wird ein 40 x 20 mm werden, da ich plane Reflektoren später einzusetzen.
Sie wird aus 3 Elementen bestehen die über 3 Bluetwiled geregelt werden.
1 x Bluetwiled 2.x Master und 2 x Slave Module.
So nun zu ein paar Technischen Daten:
CREE XP-L V5 auf Kupfer Star Platine 72x,
CREE XP-E2 Royal Blau auf Star-Platine 54x,
OSRAM Oslon SSL 80 rot auf Star 18x,
CREE XP-E2 M3 Blau auf Star-Platine 90x,
Exotic Hyper Violet LED - 430nm 42x,
3 x Bluetwiled:
A - 900mA
B - 900mA
C - 900mA
D - 900mA
E - 1200mA
F - 1200mA
G - 600mA
H - 1200mA
I - 600mA
J - 600mA
K - 600mA
L - 600mA
A - 6 x CREE XP-L V5 Emitter / 900mA
B - 6 x CREE XP-L V5 Emitter / 900mA
C - 6 x CREE XP-L V5 Emitter / 900mA
D - 6 x CREE XP-L V5 Emitter / 900mA
E - 2 x parallel 6x CREE XP-E2 M3 Blau Emitter / 1200mA
F - 2 x parallel 6x CREE XP-E2 M3 Blau Emitter / 1200mA
G - 6 x CREE XP-E2 M3 Blau Emitter / 600mA
H - 2 x parallel 6x CREE XP-E2 Royal Blau Emitter / 1200mA
I - 6 x CREE XP-E2 Royal Blau Emitter / 600mA
J - 7 x Exotic Hyper Violet LED - 430nm / 600mA
k - 7 x Exotic Hyper Violet LED - 430nm / 600mA
L - 6 x OSRAM Oslon SSL 80 rot auf Star 625nm / 600mA
Netzteile werden:
3 x HLG-320H-24B IP67 Meanwell
So das war es erst mal, jetzt folgen ein paar Bilder.
Updates folgen nach und nach.
Danke